Dual LED Battery-Powered Wireless Indoor/Outdoor Motion Lights

The Lumenology Dual Security Motion Light provides an impressive 1,000 lumens from two high-luminance white LED bulbs. Install the light virtually anywhere with the adjustable bracket or clamp. The IP44 water resistance rating equips it for outdoor use, even in the elements. MotionSense technology provides a 20-foot detectable range and 140° field-of-view, which can detect motion in both dark and light environments with the built-in LightSense technology.

Includes

• One (1) Lumenology Dual Security Motion Light in White or Bronze
• One (1) clamp
• One (1) L-rod
• One (1) butterfly nut
• One (1) plastic cap
• Four (4) plastic anchors
• Four (4) screws
• User manual

Features

• Ultra-bright two-headed LED motion light provides powerful 1,000 lumens of high-luminance white light that can instantly improve a home’s security
• 360° adjustable heads customize the light coverage to suit any environment
• 20 ft detectable range and 140° field-of-view detects motion in dark and light environments
• Three user modes: Motion activated 10 seconds, 20 seconds, or 30 seconds with auto shut-off
• Can be installed on a ceiling, wall, railing, tree, and more
• No electricity or wiring required
• Great for use indoors and outdoors, even in the elements
• Water resistance rating of IP44
• High-luminance white light
• Color temperature: 5800 K
• Beam distance: 144 ft
• LED battery: 3x D Dry Cell (not included)
• Batteries last for approx. 1,530 activations (based on 30-second auto shut-off) or 7 hours on “stay-on” mode
• Measures 11.06" x 3.75" x 5.8"
• Weighs 1.4 lbs

How to Use

• Set up:
  • Turn the battery cover thumb screw counterclockwise until the battery cover is detached from the battery box of the Lumenology Dual Security Motion Light and pull away
  • Disengage the inner battery cover by pressing down where the inner battery cover is labeled “push” and pull away
  • Note: The inner battery cover does not disconnect completely. it rotates on a 90° axis. Do not push against the inner battery cover when it is open as it may break
  • Insert 3x D batteries (not included) and be sure to align the positive (+) and negative (-) terminals correctly 
  • Caution: Some equipment using three or more batteries may appear to work properly even if one battery is inserted incorrectly; such usage may lead to battery leakage or rupture that could result in equipment damage
  • Rotate the inner battery cover back into place. Push in until it clicks and does not rotate freely
  • Close the battery box by first aligning the three tabs on the battery cover to the three notches in the battery box
  • Turn the battery cover downward until completely closed
  • Rotate the battery cover thumb screw clockwise until the battery cover is tightened and secured to the battery box
• Sensor detection range:
  • The motion sensor can detect movement in a max field-of-view of 140° and a max distance of 20 ft
  • Notes: 
    • The motion sensor is less likely to detect motion when walking directly towards the unit
    • The detection area performs best when set to a height of 6.5 ft (2 m) high
• Installation: 
  • Using bracket:
    • Measure, locate, and mark where the Lumenology Dual Security Motion Light will be installed
    • Note: It is recommended to install the Lumenology Dual Security Motion Light directly to a wooden stud, metal stud, or plywood wall sheathing
    • Place the Mounting Bracket on the spot marked in the first step
    • Using a pencil, mark the location through the four mounting holes
    • Wood stud, metal stud, or plywood wall sheathing: Fasten the mounting bracket directly to the wall with the four included screws. No additional anchors are necessary
    • Dry wall without stud: 
      • Remove the mounting bracket to expose the marks made in step above
      • Pre-drill 1/8” holes at each of the marked locations
      • Insert an anchor into each drilled hole from the previous steps. You may need to lightly hammer the anchors in place
      • Place the mounting bracket to align the mounting holes with the anchors
      • Fasten the Lumenology Dual Security Motion Light to wall with the four supplied screws
    • Concrete: 
      • Remove the mounting bracket to expose the previously made marks
      • Pre-drill 1/4” holes at each of the marked locations
      • Insert an anchor into each drilled hole from the previous step You may need to lightly hammer the anchors in place
      • Place the mounting bracket to align the mounting holes with the anchors
      • Fasten the Lumenology Dual Security Motion Light to wall with the four supplied screws
  • Using clamp:
    • Slide the threaded end of the L-rod through the clamp
    • Thread the butterfly nut onto the L-rod by rotating clockwise. Do not thread all the way down at this time
    • Add plastic cap to the threaded end of the L-rod
    • Insert the flat end of the L-rod into the L-rod slots on the mounting bracket
    • Rotate the L-rod 90° to keep the Lumenology Dual Security Motion Light from sliding off
    • Place the Lumenology Dual Security Motion Light with the hanging surface in-between the clamp and mounting bracket 
    • Once the Lumenology Dual Security Motion Light is in the desired position, continue to thread the butterfly nut clockwise until tight and secure
    • Adjust the LED lights, adjustable arm, and motion sensor as shown in the following steps until satisfied with the positioning
• Adjusting the motion sensor:
  • Grab the Motion Sensor along two sides and rotate left, right, up, or down until the preferred positioning is achieved
  • Notes:
    • Do not force any movement as it may cause damage to the motion sensor
    • The motion sensor will only rotate left / right 160° and up / down 30°
  • Maximum field-of-view: Adjust the motion sensor horizontally
  • Minimum field-of-view: Adjust the motion sensor diagonally downward
• Adjusting the body position:
  • Loosen the adjustment knob by turning counterclockwise and the adjustment arm moves freely
  • Rotate and move the Lumenology Dual Security Motion Light until the desired position is reached
  • Hold and re-tighten the adjustment knob by turning it clockwise
  • For additional movement to the adjustable arm, loosen with the bracket-to-arm screw by turning counterclockwise. This will allow the adjustable arm to rotate an additional 160° side-to-side. Once the desired positioning is achieved, re-tighten the bracket-to-arm screw by turning clockwise
  • Note: For complete adjustment capabilities, loosen the adjustment knob and bracket-to-arm screw at the same time
• Setting the mode:
  • Adjust the light sensitivity knob to align the dial to day, night, or somewhere in-between to better suit the surroundings or preferences
  • Day: LED light is activated by motion regardless of whether the surrounding area is bright or dark
  • Night: LED light is only activated by motion when the surrounding area is dark
  • Note: If additional light is preferred in a bright environment, the light sensitivity knob should be moved to the day position
• Setting the duration:
  • To adjust the timer, turn the timer knob until the dial aligns with one of the time durations:
    • 10s: Once motion is sensed and the LED light is activated, the LED light will remain on for approx. 10 seconds unless motion is detected again
    • 20s: Once motion is sensed and the LED light is activated, the LED light will remain on for approx. 20 seconds unless motion is detected again
    • 30s: Once motion is sensed and the LED light is activated, the LED light will remain on for approx. 30 seconds unless motion is detected again
  • Note: The angle between durations is not proportional to time
• Red LED indicator light:
  • The red LED indicator light will flash at different intervals depending on certain criteria:
    • Blinks once every 5 seconds: Stand-by mode
    • Blinks quickly: Motion sensor is detecting movement
    • Blinks once every second: The batteries are low and the LED lights will only activate in darkness
    • Off: There are no batteries in the Lumenology Dual Security Motion Light or the batteries need to be replaced
  • Note: The red LED indicator light is easiest viewed in a dark environment

Care Instructions

• Please keep the Lumenology Dual Motion Light and all accessories out of reach of small children
• Do not use third party power supplies or non-approved adapters with the Lumenology Dual Motion Light
• Do not attempt to open the outer casing of the Lumenology Dual Motion Light
• Do not clean the Lumenology Dual Motion Light with harsh chemicals and keep the Lumenology Dual Motion Light away from liquids
• Do not expose the Lumenology Dual Motion Light to extreme temperatures 
• Do not paint or apply coatings to the Lumenology Dual Motion Light, as you might affect moving parts or damage internal components
• Do not stick foreign objects in any port/opening of the Lumenology Dual Motion Light. Doing so may cause electric shock
• Do not attempt to disassemble or repair the Lumenology Dual Motion Light 
• Do not drop the Lumenology Dual Motion Light. Doing so may damage internal components otherwise not seen and must not be operated
• Do not submerge the Lumenology Dual Motion Light or its accessories in water
• Disassembling the Lumenology Dual Motion Light, including the removal of external screws, may cause damage that is not covered under the warranty 
• Do not mix new and old batteries. It may cause the LED light to malfunction
• Do not look directly at the LED light
• Do not mix Alkaline, Standard (Carbon Zinc), or Rechargeable (Nickel Cadmium) or (Nickel Metal Hybrid) batteries
• Do not install the main body in places where a large amount of water may come in contact with the Lumenology Dual Motion Light
• Do not use near home electric appliances
• Do not install diagonally, downward, or upside down, regardless of indoor or outdoor use as it may cause failure
• Do not install near combustible objects
• Do not install near flammable materials such as cloth, paper, or objects that may easily catch fire
• Do not use manganese, dry, or rechargeable batteries. It may cause a malfunction due to voltage shortage
• Do not install near appliances emitting radio waves as it may cause failure
• Do not install near motors or devices generating a magnetic field. May cause failure

FAQs

• Does the unit have an on/off switch so that power is not drained with when not in use?
  • There is a knob on the left side of Lumenology Dual Motion Security Light called the “Light Sensitivity Knob” that will allow you to control if the light will trigger in light or dark settings
• How does the Lumenology Dual Security Motion Light work?
  • All Lumenology lights have motion sensors that trigger the light to illuminate. The Dual Security Motion Light allows you to select if you want it to only sense motion in dark settings or in light settings, which would cause the light to trigger in all settings. Using the Timer Knob, you can select how long the light will remain illuminated for
• What kind of batteries does the Lumenology Dual Security Motion Light use?
  • The Lumenology Dual Security Motion Light uses 3 D batteries
• How do I install my Lumenology Dual Security Motion Light?
  • There are step-by-step instructions as to how to install your Lumenology Dual Security Motion Light included inside your manual. Installation methods include using the mounting bracket or a clamp
• How do I test my Lumenology Dual Security Motion Light?
  • To test your Lumenology Dual Security Motion Light before installation or at any time, it is recommended to always use fresh batteries and take into a dark room or closet. Leave the room, and after 60 seconds, walk back in and it should trigger the motion sensor to illuminate your Lumenology Product
• Can I change the brightness of the LED light?
  • No, there is only one mode of brightness
• Can I use the Lumenology Dual Security Motion Light outdoors?
  • Yes. The Lumenology Dual Security Motion Light can be used outdoors and is rated IP44
  • Please note: the Lumenology Dual Security Motion Light is water resistant, but it should not be submerged in water
• Do I have to charge the Lumenology Dual Security Motion Light before I use it?
  • No, it runs on 3 D batteries
• How long will the battery last?
  • 1,530 activations
• Will cold weather affect my Lumenology Dual Security Motion Light?
  • The Lumenology Dual Security Motion Light will not be affected by cold weather, however, the light may appear dimmer in colder temperatures
• What are lumens?
  • A lumen is the total amount of light emitted by a light source. More lumens means more light
• Is there a warranty?
  • Every Lumenology Motion Light comes with a 1-Year Limited Warranty
    

About the Brand

Limitless is an award-winning brand that is passionate about bringing you the top in tech! Use Limitless products at home or on the go!