Portable LED Battery-Powered Wireless Indoor/Outdoor Motion Light

The Lumenology Portable Motion Light provides a mighty 148 lumens from a single, high-luminance white LED bulb. Install the light virtually anywhere with the flexible tripod or magnetic base. The MotionSense technology provides a 13-foot detectable range and 100° field-of-view, which will detect motion in a dark environment.

Includes

• One (1) Lumenology Portable Motion Light in White or Black
• One (1) flexible tripod
• One (1) magnetic plate
• One (1) screw
• One (1) anchor
• User manual

Features

• Compact, lightweight design offers a wireless installation so you can easily grab-and-go when you need it
• Single, high-luminance white LED bulb boasts 148 lumens and can be used virtually anywhere
• 13 ft detectable range and 100° field-of-view detects motion in dark environments
• With a 30-second auto shut-off or always-on mode, this LED light can be utilized where additional light is needed
• Quick, easy, and versatile to set up and wrap to any fence, deck, pole, and more
• Great for a temporary and non-invasive installation
• Base can be attached to any magnetic surface or installed with the included magnetic plate to any non-magnetic surface for a more permanent solution
• Great for use indoors and outdoors, even in the elements
• Water resistance rating of IP43 
• High-luminance white light
• Color temperature: 5700 K
• Beam distance: 62 ft
• Modes: Off/On/30-Second Auto Shut-Off
• Detecting method: Passive infrared sensor
• LED battery: 3x AA Alkaline (not included)
• Batteries last for approx. 1,000 activations or 7 hours on “stay-on” mode
• Measures 3.5” x 3.75” x 4.25”
• Weighs 6 oz

How to Use

• Set up:
  • Rotate the main body downward until the LED light is facing the base
  • Remove the battery cover by using your thumb to push inward on the battery cover inset and pull away to remove the battery cover. Insert 3x AA batteries (not included) and be sure to align the positive (+) and negative (-) terminals correctly
  • Caution: Some equipment using three or more batteries may appear to work properly even if one battery is inserted incorrectly; such usage may lead to battery leakage or rupture that could result in equipment damage
  • Close the battery compartment by aligning the battery cover and pushing firmly to re-attach. You will hear a click when successful
• To use the flexible tripod: Connect the flexible tripod by inserting the threaded attachment into the threaded insert on the base and rotate clockwise to tighten. Remove by rotating the flexible tripod counterclockwise until it’s free from the base
• Standing: Adjust the legs of the flexible tripod until the Lumenology Portable Motion Light stands to your desired position. Make sure the tripod is standing on level ground
• Hanging:
• Gently bend the legs of the flexible tripod to wrap around a pole, fence, etc. Firmly tighten the legs to assure a sturdy installation
• Note: For best installation, do not wrap the legs of the flexible tripod in the same direction. Alternate each leg when wrapping them around a bar or fence to ensure a safe and successful installation
• To use the metal plate and magnet:
  • Fasten the magnetic plate directly to wood or metal stud for the most secure attachment
  • Concrete: Pre-drill a 1/4” hole and insert the supplied anchor. Place the magnetic plate over the anchor and use the included screw to secure
  • Dry Wall: Pre-drill a 1/8” hole and insert the supplied anchor. Place the magnetic plate over the anchor and use the included screw to secure
  • Attach the base of the Lumenology Portable Motion Light to the magnetic plate by utilizing the heavy-duty magnets on the bottom of the base
  • To detach the Lumenology Portable Motion Light, pull the light away at a slight angle and it will release from the magnetic plate
  • Note: The Lumenology Portable Motion Light can be magnetically attached to any magnetic surface without installation of the magnetic plate
• To operate:
  • Move the mode-changing switch to desired setting (auto/off/on) to begin using your Lumenology Portable Motion Light:
    • Auto mode: The unit will be on standby and only illuminate in dark settings when motion is detected within the 13 ft detectable range and 100° field-of-view. The light will stay on for 30 seconds unless motion is detected again
    • Off: The light will not activate
    • On: The light will remain on until the mode changing switch is moved to the off or auto position
    • Note: The light will not activate in the auto mode if the surroundings are bright. If additional light is preferred in a bright environment, the mode changing switch should be moved to the on position

Care Instructions

• Do not use third party power supplies or non-approved adapters with the Lumenology Portable Motion Light
• Do not attempt to open the outer casing of the Lumenology Portable Motion Light 
• Do not clean the Lumenology Portable Motion Light with harsh chemicals
• Do not paint or apply coatings to the Lumenology Portable Motion Light, as you might affect moving parts or damage internal components
• Do not stick foreign objects in any port/opening of the Lumenology Portable Motion Light. Doing so may cause electric shock
• Do not attempt to disassemble or repair the Lumenology Portable Motion Light
• Do not drop the Lumenology Portable Motion Light. Doing so may damage internal components otherwise not seen and must not be operated
• Do not submerge the Lumenology Portable Motion Light or its accessories in water 
• Disassembling the Lumenology Portable Motion Light, including the removal of external screws, may cause damage that is not covered under the warranty
• Do not mix new and old batteries. If batteries are not new, it may cause the light to malfunction
• Do not look directly at the LED Light
• Do not bend the arm of the flexible tripod at the same position repeatedly. Doing so may cause the flexible tripod to break
• Do not mix Alkaline, Standard (Carbon Zinc) or Rechargeable (Nickel Cadmium) or (Nickel Metal Hybrid) batteries

FAQs

• Can I change the brightness of the Lumenology Portable Motion Light?
  • No, you cannot change the brightness of the light
• How do I change the batteries of the Lumenology Portable Motion Light?
  • Rotate the main body downward until the LED Light is facing the Base
  • Remove the Battery Cover by using your thumb to push inward on the Battery Cover Inset and pull away to remove the Battery Cover
  • Insert 3x AA Batteries and be sure to align the positive (+) and negative (-) terminals correctly. (Batteries sold separately)
  • Close the Battery Compartment by aligning the Battery Cover and pushing firmly to re-attach. You will hear a click when successful
• Is the Lumenology Portable Motion Light rechargeable?
  • No, the Lumenology Portable Motion Light is not rechargeable. You can simply replace the AA batteries to recharge!
• How often do you have to replace the batteries?
  • The batteries of the Lumenology Portable Motion Light will last for up to 1,000 activations!
• What is the range of the motion sensor?
  • The Lumenology Portable Motion Light has a 13ft detectable range
• What’s the operational temperature range?
  • The recommended operating temperature for the Lumenology Portable Motion Light is between 23F and 95F. This is mostly determined by the type of battery used. Standard AA alkaline batteries are a water-based electrolyte.  As temperatures drop to freezing (32F), this will cause the ions to lose mobility and slow down the chemical reaction that provides power
• Can you use the Lumenology Portable Motion Light outdoors?
  • Yes, the Lumenology Portable Motion Light is designed for use outside and is rated IP43 certifying that it is water resistant
• Is there a warranty?
  • Every Lumenology Portable Motion Light comes with a 1-Year Limited Warranty
    

About the Brand

Limitless is an award-winning brand that is passionate about bringing you the top in tech! Use Limitless products at home or on the go!